The board itself represents the middle lath - the core - made of Fir.
The top lath is made of 3 or 4 strips of hardwood covered with 4 coats of high strength
wear proof laquer UPE-Lux (Votteler - Germany). All laths are dried separately using ultra-violet method (UVD)
The lower lath is made of Birch veneer.

The board is easy to install and takes less work than installation of strip floor.

Size:

2200 x 200 x 15 mm
2000 x 200 x 15 mm
1800 x 200 x 15 mm
1100 x 200 x 15 mm

Top lath thickness 4 mm

Birch Grade

4 strips 50 mm each wide White, Colored

Oak Grade

3 strips 66.6 mm each wide Select, Natural, Rustic

Minimum Strip Length - 120 mm
Nominal Avg. Length - 240 mm
Maximum Length - 480 mm

Middle lath Fir - thickness 10 mm

Lower lath  Birch veneer - thickness 1 mm